Skywalker Plus - High End | Overclocking

Schneller Versand gute Ware sehr gutes Produkt weiter zu empfehlen danke

When would this be back in stock?

can we get it validated with MSI QVL & Bios?

I got the silver color. Looks great. Rgb is bright and colors are accurate. Runs at advertised speed. Good die. Minimal branding. I like it. They also sent a free ssd rgb filler kit. A nice surprise. It’s also nice to know you have a option to buy some extra “dummy ram” if you want to fill out your motherboard and rgb but want to save some money.

I got two sticks of this RAM to go with an AMD Ryzen 5 5600X in a ASRock B550M Pro4. I opted for the ASRock board because they certified some ECC RAM for the board. I couldn't find the specific RAM they certified, but I found good reviews of V-Color RAM and thought I'd give it a try.

I've never before seen packaging for RAM I'd call beautiful, but this was beautiful, and the RAM couldn't have been more carefully packaged or better protected. Next time I buy RAM from V-Color I'm going to do an unboxing video. It was neat.

This is my first time using an AMD processor in ages, but it was quite happy with this ECC RAM. I opted for the B550M Pro4 based on William's 'TrueNAS' review from a year ago, although I went for a different CPU. Here are some data from Debian Bullseye, the current stable release as of this writing, showing output from the EDAC (Error Detection And Correction - the code that drives error correction when the CPU, chipset, and RAM offer it):

$ dmesg | grep EDAC
[ 0.295902] EDAC MC: Ver: 3.0.0
[ 16.384500] EDAC amd64: F19h_M20h detected (node 0).
[ 16.384545] EDAC amd64: Node 0: DRAM ECC enabled.
[ 16.384545] EDAC amd64: MCT channel count: 2
[ 16.384600] EDAC MC0: Giving out device to module amd64_edac controller F19h_M20h: DEV 0000:00:18.3 (INTERRUPT)
[ 16.384607] EDAC MC: UMC0 chip selects:
[ 16.384607] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 16.384608] EDAC amd64: MC: 2: 8192MB 3: 8192MB
[ 16.384612] EDAC MC: UMC1 chip selects:
[ 16.384613] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 16.384613] EDAC amd64: MC: 2: 8192MB 3: 8192MB
[ 16.384614] EDAC amd64: using x16 syndromes.
[ 16.384621] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.0 (POLLED)
[ 16.384621] AMD64 EDAC driver v3.5.0

I'm quite happy with V-Color and will feel safe using them again for my next server or workstation build, and hopefully my review will offer enough detail to make more folks feel safe leaving Intel behind and going with AMD for systems that want ECC.

Great quality as always, very strong overclocker! DDR5-8000 32-43-43 Very Tight very easy to reach!

I've got 2 pairs for binning, and both of them are good overclocking sticks, I've managed to get 8000+ MHz on both of them.

I'm running 6400Mhz with really tight timings Synced at 2200 on my 7950x. I'm quite happy with this RAM. It's A-Die, unlocked Richtek PMIC, thermal pads on everything including the PMIC. Has a temperature sensor. It also looks much better IRL then the renders on the website.

V-COLOR has released a very colorful and powerful RAM.
Everything works normally and the quality is very satisfactory.

This ram is perfect for a Velka 7 case + Alpenföhn Black Ridge CPU cooler and a Noctua NF-A12x15 fan. And I know there is margin for overclocking!

Thank you V-color!

SOME of the best memory modules I have used! Upon opening the box you can feel just how heavy and solid these memory sticks feel. The heatsink does what it needs to and keeps the memory in check. Overclocking to 4133Mhz on an X570 paired woth 5950X yielded no problems what so ever and the memory modules look great! Can wait to get this whole assembly buikdt as these memory sticks will add appeal and performance to any build.

Runs at rated speeds. Mirror finish looks great. However, the 3600 MHz black version of this actually runs marginally faster, so its only worth paying extra for the mirror finish. Worth it for me! V-Color isnt a well-known brand by any means, but its absolutely worth your money!

Installed this RAM into an ASRock B550M Pro4 motherboard with an AMD 3700x processor. The computer's sole purpose is to be a TrueNAS server.
RAM installed like all other RAM I've installed over the years though I was surprised by how low profile it was. At stock timings it is stable and according to Memtest is indeed ECC. I ultimately decided to overclock the RAM and, using a popular Ryzen memory configuration tool, settled on 3200Mhz CL16 at 1.31 volts. Memory is currently 6 hours stable out of a 48 hour stability test.
Overall the RAM is priced well for ECC RAM, clocks well, and seems stable at both stock and overclocked frequencies.